![]() ![]() After peeling, the loss rate of the potato is less than 2%.All parts are made of stainless steel with corrosion resistance.The peeling drum made of special material can fully peel the potato skin, but not damage the potato itself.This combined potato slicer machine can peel the potato and cut it into a threadlike shape at the same time, saving you time and cost because you don’t need to buy two machines.Potato Peeling In Factory Advantages of potato peeler Do not touch the switch with a wet hand.The bearing shall be replaced once every three months.To ensure safety, the machine must be grounded.Before cleaning and disassembling, firstly disconnect the power supply to stop the machine.When the machine is working, it is strictly forbidden to put your hand into the drum.The drum should be clean before starting the electric potato peeler.It is better to put out the tray and rinse it with water. Potato skin or soil will be accumulated at the bottom of the drum if you continuously wash off about 30 kg of potatoes.After the fault is removed, you can restart it. During operation, if an abnormal situation occurs, the power switch should be turned off quickly.After use, clean the waste and dirt with a damp cloth and apply a layer of cooking oil to the blade. ![]() Potato Processing Equipment The preoccupation of potato peeler The thickness will be increased by moving it inward. If the cutting effect doesn’t meet the requirements, the operator shall open the discharge channel and adjust the two M6 compression nuts at the front of the large blade, moving it inward or outward.Put a small number of potatoes to test the slicing thickness( actually all are adjusted before leaving the factory, generally do not need to adjust) If the potato skin has been fully removed, the shutter can be lifted, and the potatoes will be automatically discharged for cutting. Turn off the power switch and the water inlet switch to see the peeling effect of the potatoes. The potato peeler works for about 2 minutes.Open the water inlet switch to make it flow into the drum, and adjust the water discharge amount appropriately.Place the potatoes into the machine before working.The water inlet is connected to the tap water, and the sewage discharge can be connected to the hose according to the situation, or the container or the direct sewer pipe can be placed.Otherwise, any two phases of the three-phase power can be exchanged and reconnected. The rotation direction of the dial in the drum is as same as the direction of the arrow on the drum cover. Turn on the power and start the switch.Soak potatoes for a while and clean the soil on the surface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |